...
...
...
...
...
Top of the page has links to after market cylinder kits.
most of these are Meteor after market kit for the Husqvarna and Jonsered chainsaw. I made up this kit using a top quality after market cylinder and piston kit from a company that used to make OEM cylinders. I have also added a wrist pin bearing and gaskets for the exhaust and carbonator.
This insures a good seal.
The piston ring in this kit takes about 4.8 lbs of force to close. This is very close to OEM spec.
The rings from the other after market kits form Asia, take about 3.6 lbs to close. You will end up with lower compression and less power.
Lets do this right the first time. I have been working on saws for 40 years. I know what goes wrong and how to prevent it.
AFTER MARKET KITS click on image to get more infomation
Husqvarna jonsered dolmar stihl and other case splitter email me for details 80.00 includes the shipping
Looking for A Husqvarna chainsaw part? Please check out the ilistrated parts below.
.
Then email me the part number and the model of your saw, I will give you a quote with shipping options.
If you do not find your model, please let me know. Here is my email
THESE FILES ARE IN PDF FORMAT AND YOU WILL NEED ACROBAT 5 TO VIEW THEM , YOU MAY HAVE IT ALREADY. IF NOT YOU MAY DOWNLOAD IT FREE.
49 IPL ----
51-55 IPL ----
61 IPL ----
65 IPL ----
66 IPL ----
141 IPL ----
181 IPL ----
42 242 IPL ----
236 IPL ----
246 IPL ----
254 IPL ----
257 IPL ----
261 IPL ----
262 IPL ----
266 IPL ----
268 IPL ----
281-288 IPL ----
272 IPL ----
340-345-350 IPL ----
338 xp calif model ----
335xp out side of Calif ----
351 IPL ----
346xp IPL ----
353 IPL ----
435 IPL ----
455 460 IPL ----
359 / 357xp IPL ----
359 / 362 IPL ----
365 IPL ----
371 IPL ----
372 IPL ----
371k ----
375K ----
3120 IPL ----
385 IPL ----
394 IPL ----
395 IPL ----
555 IPL ----
562 xp IPL ----
570 xp and 575xp IPL ----
HOW TO PULL A CRANKSHAFT INTO A CASE ON A HUSQVARNA CHAINSAW: NOTE THIS IS THE FRIST ONE I DID. I NOW FREEZE THE BEARINGS AND HEAT THE CASE WITH A PROPAIN TOURCH TO 365f AND INSTALL THE BEARINGS FIRST<p>
. <p>
HERE IS HOW TO ADJUST A CARB BY EAR. TRY NOT TO LISTEN TO WHAT I AM SAYING. INSTEAD LISTEN TO HOW THE SAW REACTS TO HIGH SPEED ADJUSTMENT
A LITTLE INFO ON HOW THE AUTO TUNE WORKS
THEN FOR THE HUNTER , I ALSO HAVE SITKA GEAR. HERE IS A REVIEW OF THE DOWNPOUR GEAR THAT WILL KEEP YOU DRY
IF YOU DO NOT SEE YOUR MODEL, PLEASE LET ME KNOW, I MAY HAVE IT.
YOU MAY FIND THAT IT IS NOT POSSIBLE TO GET THE BEST SAW YOU EVER HAD TO EVER RUN AGAIN. I HOPE THIS IS NOT THE CASE. BUT IF IT IS IT ,THEN IT IS TIME TO LOOK INTO GETTING ANOTHER DEPENDABLE JONSERED OR HUSQVARNA.
PLEASE LOOK AT WHAT I HAVE TO OFFER. WE ARE HERE TO HELP